|
|
VoltMagic version
2RZ
VoltMagic
lets you custom configure the monitor for your setup. There are 16
voltage ranges, Normal & Low PLV Ranges, plus the choice of glitch or failsafe
detection.
USER
INTERFACE
 |
The
8 LEDs
indicate the AV (Average Voltage).
Note: Table
1 in the operation guide lists all the voltage ranges. Each LED is a 0.1 volt increment. |
| If
LED 1 blinks it's counting glitches. If LED 5-8 is blinking, it's indicating
PLV or OV (Peak Low Voltage or OverVoltage).
Note: If it blinks the same
LED that is lit for average voltage, it blinks off. Table
2 in the operation guide lists the PLV/OV trigger
points. Table
3 in the operation guide lists the trigger points for the
glitch/failsafe counter. |
| LED 8 |
AV very Low |
2 blinks = PLV very Low |
| LED 7 |
AV Low |
1-2 blinks = PLV Low |
| LED
6 |
AV moderate Low |
1-2 blinks = PLV moderate Low |
| LED 5 |
AV Normal |
1-2 blinks = PLV near Yellow or OV |
| LED 4 |
AV Normal |
|
| LED 3 |
AV Normal |
|
| LED 2 |
AV Normal |
|
| LED 1 |
AV Normal |
Blink = Glitch (Failsafe) count |
At
least one LED will always be lit showing AV. You
could have up to three LEDs lit at one time: one showing the AV
(any of the LEDs), one blinking to show the PLV or OV
(LEDs 5-8), and one blinking the Glitch/Failsafe count (always LED
1). If the AV is lighting up the same LED that
blinks, it will blink off quickly instead
of on.
(Refresh the browser if animation stops)
Data Logger feature at power
up
pop-up animation (500 kb)
On a dial-up connection it will
appear very slow until the download completes.
|
 |
 |
 |
| |
Demo
Animations
There are 16 selectable ranges covering 4 or 5 cell Ni
(NiCd or NiMh), 5.1 to 6.0 volt regulators, and
7.4 volt Li (Lithium) batteries.
These animations use (default) range 3, which has
Battery Voltage scaled
from 5.50 to 4.80
Green LED 1 = 5.5
Green LED 2 = 5.4
Green LED 3 = 5.3
Green LED 4 = 5.2
Green LED 5 = 5.1
Yellow LED 6
= 5.0
Red LED 7
= 4.9
Red LED 8 = 4.8
Peak Low Voltage (PLV)
Grn LED 5 1 blink
= 4.4
Grn LED 5 2 blink = 4.3
Yllw LED 6 1 blink
= 4.2
Yllw LED 6 2 blink = 4.1
Red LED 7 1 blink = 4.0
Red LED 7 2
blink = 3.9
Red LED 8 2 blink = 3.8
Glitch or Failsafe
Count
1 blink = 1 glitch
2 blinks = 2 to 3 glitches
3 blinks = 4 to 7 glitches
and so on. |
|
 |
 |
 |
|
){kind=link}
){kind=link}
){kind=link}
){kind=link}